Test and Measurement Forum

Introductions

Come here to introduce yourself, who you are, and what you do

Introductions

Postby chrislayeruk » Mon Jun 20, 2011 8:22 pm

Hi, Sombody has to be first here, I am Chris In Essex UK and recently purchased a 2 Channel automotive kit.
You have to start somwhere.
It is proving usefull already as I had to diagnose a missfire on a 1.4 Fiesta 03 reg. It wouldnt register a fault code as they often do. (Missfire no 2 Cyl)
Lt wave form bad. New coil leads and plugs fitted. I was then able to prove the fix and save all relevant wave forms for future referance. Before and after.
I have found Strange voltage spikes in the crank angle sensor to monitor in the future. Car runs great now but this Could become an issue.
Up the learning curve I go..........
chrislayeruk
 

Re: Introductions

Postby ziko » Thu Jun 23, 2011 1:46 pm

Hi Chris, this is the general purpose forum post, you can send your post on the automotive forum:

http://www.picoauto.com/support/

Kind regards
Ziko

Technical Specialist
ziko
Zen Master
Zen Master
 
Posts: 1705
Joined: Fri Dec 01, 2006 10:03 am
Location: St Neots

Re: Introductions

Postby leonardyuri » Sat Oct 29, 2011 2:07 am

Hi everyone! I'm a newbie here as well and hope to be a good participant and follower of this forum. A friend told me that it's really interesting to be part of this site that's why I signed up and I'm looking forward to be active in this forum particularly in some topics that interests me most. Thanks. Hope I'm welcome!
leonardyuri
Newbie
 
Posts: 0
Joined: Fri Oct 21, 2011 11:36 am
Location: united states


Return to Introductions

Who is online

Users browsing this forum: No registered users and 4 guests