Picolog Triggering

Which product is right for your exact requirements
Post Reply
inv.technicians

Picolog Triggering

Post by inv.technicians » Wed May 26, 2004 9:26 pm

Can the ADC 11/12 be set up to trigger on alarm conditions so
it will only record events we need. While monitoring contiunesly

Will it record to a new file each time it triggers

User avatar
markspencer
Site Admin
Site Admin
Posts: 598
Joined: Wed May 07, 2003 9:45 am

Post by markspencer » Thu May 27, 2004 7:41 am

Hi,

The ADC-11/12 can be set up so that it triggers, but not of an alarm limit. The trigger point can have a threshold set this is a voltage level with the range of 0-2.5v. The trigger also has set whether it is a rising or falling signal.

When the trigger occurs a new file is saved with the data.

To use triggers in Picolog you have to run it in fast block mode.

Best regards,
Regards,

Mark Spencer

Post Reply