Need new probes?

Which product is right for your exact requirements
Post Reply
PaulTarka

Need new probes?

Post by PaulTarka »

Can we use our existing high voltage probes with a PicoScope 5203? Or do we need to use probes supplied on this site?

ziko
Advanced User
Advanced User
Posts: 1705
Joined: Fri Dec 01, 2006 10:03 am
Location: St Neots

Re: Need new probes?

Post by ziko »

As long as your high voltage probe is rated to measure these voltages safely it should be no problem. What specifically is the probe model?

Kind regards
Ziko

Technical Specialist

PaulTarka

Re: Need new probes?

Post by PaulTarka »

Thanks for the reply. We are using some Agilent 100:1 Probes.

PaulTarka

Re: Need new probes?

Post by PaulTarka »

Sorry for the double-post, but I have the specific information available now. :roll:

Agilent 10076A
100:1 probe
66.7M ohm //3pt
for
1Mohm // 7-20pt

1kVpk CAT II
4kVpk CAT I

ziko
Advanced User
Advanced User
Posts: 1705
Joined: Fri Dec 01, 2006 10:03 am
Location: St Neots

Re: Need new probes?

Post by ziko »

Hi our scopes don't have a safety ground like a mains powered scope, it so I would not recommend this for use on high voltages.
Ziko

Technical Specialist

Post Reply