Test and Measurement Forum

ps4227 error codes

Post any questions you may have about our current range of oscilloscopes

ps4227 error codes

Postby AlXCo » Thu May 19, 2011 9:14 am

Hi, when I start my C# project and try to initialize the PS4227 there appears the error code 78 (0x4E). In the programmers guide the documented error codes only reach from 0x00 to 0x49.
So how can I find out what's causing the error?

Best regards!

Re: ps4227 error codes

Postby Chris » Fri May 20, 2011 10:16 am

This error code would indicate an FPGA failure, which seems strange.

Could you try running the device using PicoScope 6.

If this works ok, could you check that your application is using the same PS4000.dll as the Picoscope application uses.

C:\Program Files\Pico Technology\PicoScope6

Site Admin
Site Admin
Posts: 169
Joined: Tue Aug 17, 2010 9:00 am
Location: St. Neots

Return to USB PC Oscilloscopes

Who is online

Users browsing this forum: No registered users and 0 guests