Test and Measurement Forum

4 channel logger for torque, speed and temperature

Which product is right for your exact requirements

4 channel logger for torque, speed and temperature

Postby Pam » Thu May 13, 2004 3:04 pm


I'm looking for a 4 (or more) channel, 10kHz logger that can be used to record torque (2 channels), speed and temperature.

Could the ADC-11/10 be used for this purpose? If so, what form would the input from the sensors need to take (Volts/Current)?


Postby markspencer » Fri May 14, 2004 8:15 am


Thank you for your post.

The ADC-11/12 has 10,000 samples per second which is divided between the active channels, so the sampling rate of 10Khz is not obtainable while looking at 4 channels at the same time.

Unfortunately, we do not have a single unit that has 4 channels and a 10kHz sample rate on each channel. To achieve this you would need to use multiple units. Further to this you would also have to write your own software.

If you are considering the above then I would recommend looking at the ADC-212/3.

Best regards,

Mark Spencer
User avatar
Site Admin
Site Admin
Posts: 598
Joined: Wed May 07, 2003 9:45 am

Return to Pre-Sales Advice

Who is online

Users browsing this forum: No registered users and 0 guests