Pre sales advice

Which product is right for your exact requirements
Post Reply
Neil Bell

Pre sales advice

Post by Neil Bell »

Hello I have a two darkrooms and an inspection area that would require detailed temperature & humidity monitoring. I would like a monitor these areas via our ip based network so anyone can view the results, I already own two RH02 units connected to a dedicated PC that is on the network but the software is not really up to my requirements. I am looking for a cost effective solution which would possibly utilise my previously purchased equipment. Is there a starter kit available in your EnviroMon range that would include humidity.

Please could offer some options and prices

regards Neil Bell

neil.bell@jdphoto.co.uk

User avatar
markspencer
Site Admin
Site Admin
Posts: 598
Joined: Wed May 07, 2003 9:45 am

Post by markspencer »

Hi,

Thank you for your enquiry.

Unfortunately, there is not a starter kit for the Enviromon System that incorporates humidity. The minimum equipment that you would require is:
EL005/El008 Data logger
EL026 Temperature and Humidity (EL030 supplied with this converter)
The RH-02 cannot be used with the Enviromon System.

Best regards,
Regards,

Mark Spencer

Neil Bell

Thanks

Post by Neil Bell »

Thank You for your reply.

One more question do i need three separate converters for the three areas i wish to monitor or can multiple sensors be connected to one converter

neil...

Post Reply