Test and Measurement Forum

Pre sales advice

Which product is right for your exact requirements

Pre sales advice

Postby Neil Bell » Thu May 13, 2004 10:15 am

Hello I have a two darkrooms and an inspection area that would require detailed temperature & humidity monitoring. I would like a monitor these areas via our ip based network so anyone can view the results, I already own two RH02 units connected to a dedicated PC that is on the network but the software is not really up to my requirements. I am looking for a cost effective solution which would possibly utilise my previously purchased equipment. Is there a starter kit available in your EnviroMon range that would include humidity.

Please could offer some options and prices

regards Neil Bell

Neil Bell

Postby markspencer » Fri May 14, 2004 8:05 am


Thank you for your enquiry.

Unfortunately, there is not a starter kit for the Enviromon System that incorporates humidity. The minimum equipment that you would require is:

EL005/El008 Data logger
EL026 Temperature and Humidity (EL030 supplied with this converter)

The RH-02 cannot be used with the Enviromon System.

Best regards,

Mark Spencer
User avatar
Site Admin
Site Admin
Posts: 598
Joined: Wed May 07, 2003 9:45 am


Postby Neil Bell » Fri May 14, 2004 10:42 am

Thank You for your reply.

One more question do i need three separate converters for the three areas i wish to monitor or can multiple sensors be connected to one converter

Neil Bell

Return to Pre-Sales Advice

Who is online

Users browsing this forum: No registered users and 0 guests