Problems with 4227

Post any questions you may have about our current range of oscilloscopes
Post Reply
daniele bartalesi

Problems with 4227

Post by daniele bartalesi »

I, i am doing a program in Visual basic 6 Sp2.
for first i am sorry for my English.
I have a problem with the configuration of the vertical position. I haven't find any command for configure the vertical channel position.
there is nothing to do this?
best regards

Daniele Bartalesi
RSE Italy
Milano

ziko
Advanced User
Advanced User
Posts: 1705
Joined: Fri Dec 01, 2006 10:03 am
Location: St Neots

Re: Problems with 4227

Post by ziko »

Hi do you mean the voltage range? Or do you mean an offset?

Kind regards
Ziko

Technical Specialist

daniele bartalesi

Re: Problems with 4227

Post by daniele bartalesi »

i mean an offset

ziko
Advanced User
Advanced User
Posts: 1705
Joined: Fri Dec 01, 2006 10:03 am
Location: St Neots

Re: Problems with 4227

Post by ziko »

Hi there is no offset function within the driver you would have to implement this yourself. You can either do this by adding a fixed offset (number of ADC counts) or as a percentage of the ADC counts.

Kind regards

Ziko
Ziko

Technical Specialist

Post Reply