Test and Measurement Forum

How to use DDS file to calibrate the internal sensors

Forum for discussing PicoLog

How to use DDS file to calibrate the internal sensors

Postby Ahlo » Sat May 08, 2004 9:39 pm

In writing own progam by calling DLL, as my understanding, the sensor connected to EXT1 or EXT2 can be calibrated by using DDS file. But is it possible to do the same thing for internal MIC and temperature sensor?
If any how?

Thanks

Ahlo
Ahlo
 

Postby markspencer » Mon May 10, 2004 8:23 am

Hi,

Thank you for your post.

The EXT1 and EXT2 use the DDS files to convert the voltage in to a scaled unit. The internal sensors such as the Microphone and Temperature sensor are already scaled, in a similiar way through the driver (drdaq32.dll).

The scaling file .DDS is not a method of calibration for the external sensors.

Best regards,
Regards,

Mark Spencer
User avatar
markspencer
Site Admin
Site Admin
 
Posts: 598
Joined: Wed May 07, 2003 9:45 am


Return to PicoLog

Who is online

Users browsing this forum: No registered users and 0 guests