measure time between 2 pulses

Forum for discussing PicoScope version 6 (non-automotive version)
Post Reply
matt3526

measure time between 2 pulses

Post by matt3526 » Thu May 05, 2011 12:32 pm

Hi, I would like to measure the time between two pulses from separate inputs. The pulses are going to be microseconds apart and so I need a resolution greater than this. I this something the 2205 can do with picoscope 6?

Thanks

ziko
Advanced User
Advanced User
Posts: 1705
Joined: Fri Dec 01, 2006 10:03 am
Location: St Neots

Re: measure time between 2 pulses

Post by ziko » Thu May 05, 2011 1:52 pm

Hi this should be not be a problem really, what is the duration of each of the pulses? Also what is the amplitude?
Ziko

Technical Specialist

matt3526

Re: measure time between 2 pulses

Post by matt3526 » Thu May 05, 2011 2:31 pm

The duration is ~10ms, but I'm not interested in seeing the whole pulse, only the delay between the start of each pulse. Amplitude is about 180mV.

Thanks

ziko
Advanced User
Advanced User
Posts: 1705
Joined: Fri Dec 01, 2006 10:03 am
Location: St Neots

Re: measure time between 2 pulses

Post by ziko » Tue May 10, 2011 10:40 am

Hi this should be no problem really on the 2205.
Ziko

Technical Specialist

Post Reply