Test and Measurement Forum

Accessing a printer port at base address 2070 ?

Post general discussions on using our drivers to write your own software here

Accessing a printer port at base address 2070 ?

Postby CHN » Thu Apr 29, 2004 1:19 pm


HW : PICO ADC11 connected to printer port.
OS : Win 2000.

Could anyone please please help me on accessing an arbitrary
printer port address, or specifically address 0x2070. Does PICO
have a driver ? or can someone help me with a driver...

My PICO software is only capable of addressing

Postby markspencer » Tue May 04, 2004 8:16 am


Thank you for your post.

The ADC11 does have a driver that you can use in your own applications, the driver name is adc1132.dll, and you will find this in the same directory as Picolog/Picoscope was installed.

If you are unable to locate a copy of the driver on your system, them it and the units manual can be downloaded from here. Included in the package are examples.

Best regards,

Mark Spencer
User avatar
Site Admin
Site Admin
Posts: 598
Joined: Wed May 07, 2003 9:45 am

Return to General Software Discussions

Who is online

Users browsing this forum: No registered users and 0 guests