4224 and dBm/Hz

Post any questions you may have about our current range of oscilloscopes
Post Reply
xdsl

4224 and dBm/Hz

Post by xdsl » Wed Apr 06, 2011 6:24 pm

When using the PicoScope 4224 in Specrum Mode I to have a graph measuring in dBm on the Y-Axis and the range of Frequency on the X-Axis. With this presentation I can see the referenced power in dBm

Now, I would like to measure the power via dBm/Hz

Is there an option in the setting somewhere to have the Y-Axis in dBm/Hz

thanks in advance

ziko
Advanced User
Advanced User
Posts: 1705
Joined: Fri Dec 01, 2006 10:03 am
Location: St Neots

Re: 4224 and dBm/Hz

Post by ziko » Fri Apr 08, 2011 12:00 pm

Hi unfortunately not,

Unless of course you write your own software to do so!

Or Unless there is a third party software tool that can look at saved text or binary files and do this, but I am not an expert in this area I don't know if anybody on the forum has had experience with this. Ofcourse you this would mean it would not be done in real time though!

Kind regards
Ziko

Technical Specialist

Post Reply