Test and Measurement Forum

Need Logic Analyser-Data Acquisition Box for Atmel AT9xxx?

Which product is right for your exact requirements

Need Logic Analyser-Data Acquisition Box for Atmel AT9xxx?

Postby Gnorth » Wed Apr 07, 2004 2:04 am

Need Logic Analyser-Data Acquisition Box for Atmel AT9xxx?

I need a Logic nalyser which can display at least 16 channels, preferably 32.
I'll be happy even with 8 if the sample rate and logging is good.

Sample rate about 20 MHz.
The total memory about 200 KB
access time 10 ns max.

The purpose is to detect slow spikes or slow transients?
Guy
Gnorth
 

Postby markspencer » Wed Apr 07, 2004 8:10 am

Hi,

Thank you for your request, the only units that could measure the signals you specify are ADC-212/50, ADC-212/100, however these units are ocsilloscopes that can be used as data loggers. They have 2 channels, and it would not be possible to use multiple units.

If you could manage with just two channels, then please look at there specifications, and contact me again if you have further questions.

Best regards,
Regards,

Mark Spencer
User avatar
markspencer
Site Admin
Site Admin
 
Posts: 598
Joined: Wed May 07, 2003 9:45 am


Return to Pre-Sales Advice

Who is online

Users browsing this forum: No registered users and 1 guest