2105 on Windows XP SP3

Post any questions you may have about our current range of oscilloscopes
Post Reply
ljohnway

2105 on Windows XP SP3

Post by ljohnway »

Trying to get new 2105 working on Windows XP SP3. Is SP3 supported?
2105 USB driver appears to install correctly, but PicoScope fails to ever see 2105.
After rebooting post installation, connecting 2105 causes other USB devices to fail.
Tried current and many older versions of PicoScope, without success.
Help gratefully received.
John Way

ziko
Advanced User
Advanced User
Posts: 1705
Joined: Fri Dec 01, 2006 10:03 am
Location: St Neots

Re: 2105 on Windows XP SP3

Post by ziko »

What version of the software are you using?

Kind regards
Ziko

Technical Specialist

ljohnway

Re: 2105 on Windows XP SP3

Post by ljohnway »

I have tried:
R6.4.92
R6.4.28
R6.2.13
R5.21.3
All versions only indicate XP SP2, not SP3. Is this an issue?
Regards,
John

ziko
Advanced User
Advanced User
Posts: 1705
Joined: Fri Dec 01, 2006 10:03 am
Location: St Neots

Re: 2105 on Windows XP SP3

Post by ziko »

Hi John,

The software should run perfectly fine on these versions or any version really. Should be able to run on XP SP2 and SP3 as well.

Can you go into device manager and check the PID and VID numbers? Let me know if you need help on finding these.

Kind regards
Ziko

Technical Specialist

Post Reply