Test and Measurement Forum

multiple triggers

Forum for discussing PicoScope (version 5)

multiple triggers

Postby Haydn » Tue Feb 08, 2011 1:56 pm

Hi, I'm using an ADC200/50 with picoscope R5.21.2

I am unable to set more than one trigger.

I would like set picoscope to trigger at +200mv and at -200mv.

is this possible?
Haydn
Newbie
 
Posts: 0
Joined: Wed Dec 15, 2010 4:17 pm

Re: multiple triggers

Postby ziko » Tue Feb 08, 2011 2:55 pm

Hi unfortunately you can only do simple triggering with the ADC212. Not sure if this is what you are looking for but we have advanced triggering for most of our USB scopes:

http://www.picotech.com/education/oscil ... ering.html

Kind regards
Ziko

Technical Specialist
ziko
Zen Master
Zen Master
 
Posts: 1705
Joined: Fri Dec 01, 2006 10:03 am
Location: St Neots

Re: multiple triggers

Postby Haydn » Wed Feb 09, 2011 8:31 am

Thanks for the reply.
Am I right in thinking I would need to purchase a 3000 series picoscope to have this feture in picoscope 6 software.
Haydn
Newbie
 
Posts: 0
Joined: Wed Dec 15, 2010 4:17 pm

Re: multiple triggers

Postby ziko » Thu Feb 10, 2011 3:03 pm

Well it depends really on what you want to do exactly. There are window triggers where you can have 2 voltage levels so a signal can trigger when it enters or leaves a window.

Can you describe the signal you are trying to trigger on?

Kind regards
Ziko

Technical Specialist
ziko
Zen Master
Zen Master
 
Posts: 1705
Joined: Fri Dec 01, 2006 10:03 am
Location: St Neots


Return to PicoScope 5

Who is online

Users browsing this forum: No registered users and 0 guests