Test and Measurement Forum

Multi Channel Analyser

Which product is right for your exact requirements

Multi Channel Analyser

Postby Starfire » Mon Mar 01, 2004 8:43 pm

Can Pico products provide the basis for a MCA ( Gamma Spectrometer )?
Starfire
 

Postby markspencer » Tue Mar 02, 2004 8:56 am

Hi,

The products that we produce cannot be used directly as a Gamma Spectrometer, but if you can source a sensor that can provide a single ended output or 4-20mA output that can then be scaled to the relevant units then it would be possible.

Best regards,
Regards,

Mark Spencer
User avatar
markspencer
Site Admin
Site Admin
 
Posts: 598
Joined: Wed May 07, 2003 9:45 am

Question 2

Postby Starfire » Fri Mar 05, 2004 12:47 am

Tks Mark - I would be using a Scintillation detector. May I pose a second ?

How easy would it be to modify the data log software to display as a gamma spectrum?
Starfire
 

Postby markspencer » Fri Mar 05, 2004 8:27 am

Hi,

To convert the data from a 4-20mA reading there are two basic methods, to use a look up file which it usually provided by the manufacturer of the sensor, or to us an equation. Both are relatively simple, download the help manual for Picolog and have a look under scaling.

Best regards,
Regards,

Mark Spencer
User avatar
markspencer
Site Admin
Site Admin
 
Posts: 598
Joined: Wed May 07, 2003 9:45 am


Return to Pre-Sales Advice

Who is online

Users browsing this forum: No registered users and 0 guests