I have just installed a EL 005 datalogger with 4 EL001 triple temperature loggers connected to it. I am able to program the device numbers to the loggers. When I try to read the converter number I finds the converter, displays the correct number. Then I click OK. When the logger wants to restart I get the following error:
"Restarting the logger Operation Failed".
I am getting this error on every converter. I have tried the newest software. A hard reset of the logger and also removed the battery. Nothing helps. What can I do??
Converter does not restart after reading
Re: Converter does not restart after reading
Hi yes you need to upgrade the firmware of the logger, if you go to Utilities and then choose Logload then follow the instructions, disconnect all converters, you will need a paper clip. For more help follow this link below, it has the steps that you will see on the latest software but before it was made as a GUI
http://www.picotech.com/support/topic4038.html
Kind regards
http://www.picotech.com/support/topic4038.html
Kind regards
Ziko
Technical Specialist
Technical Specialist