Hi,
I am wondering if its possible to log the actual value at the time of logging rather than the average over the selected time interval.
I have some sensors on an EL037 which I only want to power for 5 minutes every hour and record their values. At the moment the Logger averages 0mV for 55mins and 600mV for 5 mins giving an reading of about 50mV instead of the desired 600mV.
Can the logger EL005 be reprogramed?
Loging interval average
Re: Loging interval average
Hi the only way you can do this is if you communicated to the serial port, you can find instructions on how to do this under section 4.8 in the enviromon user manual:
http://www.picotech.com/document/pdf/emw.en-10.pdf
Kind regards
http://www.picotech.com/document/pdf/emw.en-10.pdf
Kind regards
Ziko
Technical Specialist
Technical Specialist