Loging interval average

Post Reply
conifer_mad

Loging interval average

Post by conifer_mad »

Hi,
I am wondering if its possible to log the actual value at the time of logging rather than the average over the selected time interval.

I have some sensors on an EL037 which I only want to power for 5 minutes every hour and record their values. At the moment the Logger averages 0mV for 55mins and 600mV for 5 mins giving an reading of about 50mV instead of the desired 600mV.

Can the logger EL005 be reprogramed?
Top
ziko
Advanced User
Advanced User
Posts: 1705
Joined: Fri Dec 01, 2006 10:03 am
Location: St Neots

Re: Loging interval average

Post by ziko »

Hi the only way you can do this is if you communicated to the serial port, you can find instructions on how to do this under section 4.8 in the enviromon user manual:

http://www.picotech.com/document/pdf/emw.en-10.pdf


Kind regards
Ziko

Technical Specialist
Top
Post Reply

Return to “Hardware”