Test and Measurement Forum

High Pulse Measurement errors

Post any questions you may have about our current range of oscilloscopes

High Pulse Measurement errors

Postby UQM_user » Tue Nov 23, 2010 8:52 pm

Hi. My high pulse measurements are less than the pulse width on a 3204. I can measure the positive portion of the sine wave with cursors and it is always ~25% longer than the automatic measurement. Has anybody run into this?
UQM_user
Newbie
 
Posts: 0
Joined: Tue Nov 23, 2010 8:40 pm

Re: High Pulse Measurement errors

Postby ziko » Thu Nov 25, 2010 3:23 pm

Hi and thank you for your post.

What is the frequency of the signal, what is your result and what are you expecting, could you send an example waveform. The more information you can provide the easier it will be to help.

Kind regards
Ziko

Technical Specialist
ziko
Zen Master
Zen Master
 
Posts: 1705
Joined: Fri Dec 01, 2006 10:03 am
Location: St Neots


Return to USB PC Oscilloscopes

Who is online

Users browsing this forum: No registered users and 0 guests