Picosoft v. 6.4.92 used with picoscope 4424

Forum for discussing PicoScope version 6 (non-automotive version)
Post Reply
Ortenzi
Newbie
Posts: 0
Joined: Sat Nov 20, 2010 3:47 pm

Picosoft v. 6.4.92 used with picoscope 4424

Post by Ortenzi » Sat Nov 20, 2010 5:06 pm

Hi, I've attached a file with continously error on PICO 6.4.92 when we're trying to change something the program simply freezes. The zip file here is only of the 5 different condiction where the soft freezed. I'd try to install the beta version but I think that it worst at this time. Another question: Is in the PICO 4424, the total amount of recoding time controlled through the preferences window? In this case, if I put 500s means about 8 minutes of continous receording? thanks
Attachments
Report_2010_11_20.zip
(5.32 KiB) Downloaded 191 times
Report_2010_11_19.zip
(3.96 KiB) Downloaded 164 times

ziko
Advanced User
Advanced User
Posts: 1705
Joined: Fri Dec 01, 2006 10:03 am
Location: St Neots

Re: Picosoft v. 6.4.92 used with picoscope 4424

Post by ziko » Tue Nov 23, 2010 12:26 pm

Hi Ortenzi,

I have forwarded this to our software engineers, thank you for sending them. I had a brief look at them and it seems they are using 6.4.92 and 6.5.42. Are the problems you are encountering repeatable?

Kind regards
Ziko

Technical Specialist

Ortenzi
Newbie
Posts: 0
Joined: Sat Nov 20, 2010 3:47 pm

Re: Picosoft v. 6.4.92 used with picoscope 4424

Post by Ortenzi » Tue Nov 23, 2010 5:00 pm

Yes. Always. All times I tried to change something the software has blocked. I couldn't do anything because I cann't to put and save my start settings in the bwta version.

Post Reply