Test and Measurement Forum

triggering from a filtered signal

Forum for discussing PicoScope version 6 (non-automotive version)

triggering from a filtered signal

Postby Gustav » Wed Nov 10, 2010 9:01 am

I want to low pass filter a signal in PicoScope6 and then trigger from the signal. Low pass filtering works great and the signal looks good on the screen, but the trigger is activated from the raw signal.

I think, the obvious thing would be to trigger from the filtered signal and not the unfiltered. The point of filtering the signal in the first place is to be able to use it as reliable trigger signal.

:?
Gustav
Guru
Guru
 
Posts: 63
Joined: Sat Jan 23, 2010 1:33 pm

Re: triggering from a filtered signal

Postby PeterF » Wed Dec 29, 2010 11:31 am

Hi,
I am afraid that triggering from a filtered signal is at present not possible. It would be a major change to PicoScope6.
Regards,
PeterF.
PeterF
Zen Master
Zen Master
 
Posts: 435
Joined: Thu Jun 07, 2007 10:53 am
Location: Cambridgeshire


Return to PicoScope 6 for Windows

Who is online

Users browsing this forum: No registered users and 0 guests