enviromon logger and converter

iansebek · Post by **iansebek** » Mon Nov 01, 2010 8:59 pm

I have an Enviromon EL005 logger and an EL037 converter. After installing the envirmon software and using a seriel to usb converter cable to connect the logger to my laptop and the logger to the converter i tried to set up a basic test to see whether anything was working together and to see would i get any result on my PC.
My problem is after taking a guided tour beacuse i am new to this product i get to a stage where i enter the logger and the converter and once i proceed i get a message saying "ERROR ,get logger version".What would be the way of finding out whether the software, logger and converter are working together?

Thanks

ziko · Post by **ziko** » Thu Nov 04, 2010 3:43 pm

Hi this is because it cannot communicate with the logger. There are a number of things to check.

1) First of all does your USB to serial converter appear in device manager?
2)If so what com port number does it appear at.

3) Choose the corresponding com port number on our software.

4) Is the light of the EL005 logger flashing?

Kind regards

Ziko

iansebek · Post by **iansebek** » Thu Nov 04, 2010 9:25 pm

hi
thanks for the reply.

Is this software compatible with windows 7?
I have used another computer with windows XP and the logger is communicating with the software.

ziko · Post by **ziko** » Tue Nov 09, 2010 12:42 pm

Yes it is compatible with Windows 7, on your Windows XP machine did you use a USB to serial converter or a normal serial port?

iansebek · Post by **iansebek** » Tue Nov 16, 2010 6:48 pm

On the windows XP machine i used the seriel to USB. With the Windows 7 machine i set up a simple configuration. i then disconnected the logger and converter from the machine and then connected it back up after 10 minutes of monitoring. When i tried to open the program it told me there was an app crash and error. the enviromon program will not open .

ziko · Post by **ziko** » Mon Nov 22, 2010 12:44 pm

Did the USB to serial converter change port numbers this might cause a crash if it cannot find a COM port?

Test & Measurement Forum

enviromon logger and converter

enviromon logger and converter

Re: enviromon logger and converter

Re: enviromon logger and converter

Re: enviromon logger and converter

Re: enviromon logger and converter

Re: enviromon logger and converter