Creating LP filters in Math Processing

Post any questions you may have about our current range of oscilloscopes
Post Reply
sateesh_bajikar
Newbie
Posts: 0
Joined: Sat Oct 30, 2010 1:34 am

Creating LP filters in Math Processing

Post by sateesh_bajikar »

I need to create a LP filter in the math processing in order to view the raw signal and a LP (100kHz) post-processed version of the same. Any tips/ thoughts on the easiest way to do this.
Sateesh

PeterF
Advanced User
Advanced User
Posts: 435
Joined: Thu Jun 07, 2007 10:53 am
Location: Cambridgeshire

Re: Creating LP filters in Math Processing

Post by PeterF »

Hi,
If if you are using a 3000, 4000, 5000 or 6000 series scope, then Low Pass Filtering is easily applied to any channel by selecting "Channel Options" & "Low Pass Filtering". The break-point frequency can be set.
Regards,
PeterF.

Post Reply