Test and Measurement Forum

Creating LP filters in Math Processing

Post any questions you may have about our current range of oscilloscopes

Creating LP filters in Math Processing

Postby sateesh_bajikar » Sat Oct 30, 2010 1:38 am

I need to create a LP filter in the math processing in order to view the raw signal and a LP (100kHz) post-processed version of the same. Any tips/ thoughts on the easiest way to do this.
Posts: 0
Joined: Sat Oct 30, 2010 1:34 am

Re: Creating LP filters in Math Processing

Postby PeterF » Wed Dec 29, 2010 11:40 am

If if you are using a 3000, 4000, 5000 or 6000 series scope, then Low Pass Filtering is easily applied to any channel by selecting "Channel Options" & "Low Pass Filtering". The break-point frequency can be set.
Zen Master
Zen Master
Posts: 435
Joined: Thu Jun 07, 2007 10:53 am
Location: Cambridgeshire

Return to USB PC Oscilloscopes

Who is online

Users browsing this forum: No registered users and 0 guests