new funtion

Forum for discussing PicoScope version 6 (non-automotive version)
Post Reply
maxsca
User
User
Posts: 5
Joined: Fri Sep 19, 2008 10:27 am

new funtion

Post by maxsca »

Good morning,
with a only positive signal, es. 0 to 5 Volt TTL, it's possible to remove from view the negative side to expande the signal on full screen ??

Massimo - Italy

User avatar
Autonerdz
Advanced User
Advanced User
Posts: 141
Joined: Wed Nov 20, 2002 4:19 pm
Location: Washington State USA
Contact:

Re: new funtion

Post by Autonerdz »

Massimo,

Yes. Duplicate the x1 probe into your custom probes library. Then edit the probe changing the range management to advanced, auto generate ranges, and then add your desired 0-5v range. Have your scope plugged in when you do this so you generate all the hardware ranges for that model.

You can also skip this and just add some vertical zoom and fill the display.

_________________
Tom Roberts
(The Picotologist)
http://www.autonerdz.com
skype: autonerdz
THE PicoScope Automotive Authority
In North America

johnw
Newbie
Posts: 0
Joined: Tue Mar 16, 2010 9:14 pm
Location: England

Re: new funtion

Post by johnw »

oww nice tip Tom I think I'll give this a go myself.
Could be a good one for a FAQ.
john
--------------------------------------------------

Post Reply