Test and Measurement Forum

new funtion

Forum for discussing PicoScope version 6 (non-automotive version)

new funtion

Postby maxsca » Fri Sep 17, 2010 2:48 pm

Good morning,
with a only positive signal, es. 0 to 5 Volt TTL, it's possible to remove from view the negative side to expande the signal on full screen ??

Massimo - Italy
maxsca
Active User
Active User
 
Posts: 5
Joined: Fri Sep 19, 2008 10:27 am

Re: new funtion

Postby Autonerdz » Sat Sep 18, 2010 4:43 pm

Massimo,

Yes. Duplicate the x1 probe into your custom probes library. Then edit the probe changing the range management to advanced, auto generate ranges, and then add your desired 0-5v range. Have your scope plugged in when you do this so you generate all the hardware ranges for that model.

You can also skip this and just add some vertical zoom and fill the display.

_________________
Tom Roberts
(The Picotologist)
http://www.autonerdz.com
skype: autonerdz
THE PicoScope Automotive Authority
In North America
User avatar
Autonerdz
Guru
Guru
 
Posts: 141
Joined: Wed Nov 20, 2002 4:19 pm
Location: Washington State USA

Re: new funtion

Postby johnw » Thu Oct 07, 2010 3:34 pm

oww nice tip Tom I think I'll give this a go myself.
Could be a good one for a FAQ.
john
--------------------------------------------------
johnw
Newbie
 
Posts: 0
Joined: Tue Mar 16, 2010 9:14 pm
Location: England


Return to PicoScope 6 for Windows

Who is online

Users browsing this forum: No registered users and 0 guests