Test and Measurement Forum

NEW LabVIEW Drivers and Examples for 4000, 5000 and 6000.

Post your LabVIEW discussions here

NEW LabVIEW Drivers and Examples for 4000, 5000 and 6000.

Postby Robin » Mon Sep 06, 2010 2:57 pm

We have added new LabVIEW drivers and examples to the SDKs for the 4000, 5000 and 6000 series oscilloscopes. These should make development of LabVIEW applications using these products significantly easier.

There is now a library of VIs that wrap the driver API functions. The below image shows how simple it is to achieve block-mode operation using these VIs.

labviewBlock.jpg


For further information on these new drivers and examples, see the Programmer’s Guides contained in the SDKs.
Robin
Zen Master
Zen Master
 
Posts: 558
Joined: Fri Sep 19, 2008 10:17 am

Re: NEW LabVIEW Drivers and Examples for 4000, 5000 and 6000

Postby ekawaldi » Wed Sep 22, 2010 6:56 am

Thank you picoscope for labview.
I used rapidblock for picoscope 5000 series.
Could I reseived time/trigger?
How to add the programe to propose this case?

Best regard,

Eka PW
User avatar
ekawaldi
Newbie
 
Posts: 0
Joined: Sat Jun 26, 2010 9:19 pm

Re: NEW LabVIEW Drivers and Examples for 4000, 5000 and 6000

Postby Robin » Wed Sep 22, 2010 8:11 am

Hi

I'm not sure I understand the question. If you are trying to get the time of (or between) triggers in rapid block mode, unfortunately this is not possible.

Robin
Robin
Zen Master
Zen Master
 
Posts: 558
Joined: Fri Sep 19, 2008 10:17 am

Re: NEW LabVIEW Drivers and Examples for 4000, 5000 and 6000

Postby ekawaldi » Fri Sep 24, 2010 1:42 am

Thank you for your answer.

Best Regard,
Eka
User avatar
ekawaldi
Newbie
 
Posts: 0
Joined: Sat Jun 26, 2010 9:19 pm

Re: NEW LabVIEW Drivers and Examples for 4000, 5000 and 6000

Postby Rosli » Thu Oct 21, 2010 1:24 pm

Hi,

Is the LabVIEW drivers is compatible with Window7 and LabVIEW 8.6?

I am using the new drives that you have posted .They works fine with Window Vista and LabVIEW 8.5 but not working when I tested it on Window7 and LabVIEW 8.6.

I want to trigger the picoscope from EXT using the example from PS5000sdk_r10_1_0_5. It trigger perfectly in CHA but not working when I trigger it from CHB or EXT. This is when using Window7 and LabVIEW 8.6.

It would be nice if you can explain what it is not working when triggering from CHB and EXT and suggestion to get it trigger at least from EXT.

Thanks.

Shimi
Rosli
Newbie
 
Posts: 0
Joined: Thu Oct 14, 2010 1:40 pm

Re: NEW LabVIEW Drivers and Examples for 4000, 5000 and 6000

Postby Chris » Wed Nov 03, 2010 10:24 pm

PS5000sdk_r10.1.0.8 are available for download, which have fixed some triggering issues.
Chris
Site Admin
Site Admin
 
Posts: 169
Joined: Tue Aug 17, 2010 9:00 am
Location: St. Neots

Re: NEW LabVIEW Drivers and Examples for 4000, 5000 and 6000

Postby ekawaldi » Tue Nov 09, 2010 4:21 am

Hi,

I try used advand trigeer in Rapid blok ( I want to use a windows trigger), but I can't.

Could you give me solution how used window trigger (advand trigger) in rapid block.

Best regard,


Eka
User avatar
ekawaldi
Newbie
 
Posts: 0
Joined: Sat Jun 26, 2010 9:19 pm

Re: NEW LabVIEW Drivers and Examples for 4000, 5000 and 6000

Postby Chris » Wed Nov 10, 2010 2:25 pm

If you'd like to send you example code to

support@picotech.com

describing what your trying to do, I'll take a look.

-Chris
Chris
Site Admin
Site Admin
 
Posts: 169
Joined: Tue Aug 17, 2010 9:00 am
Location: St. Neots

Re: NEW LabVIEW Drivers and Examples for 4000, 5000 and 6000

Postby yongsheng » Sun May 15, 2011 8:59 am

hi how do you do !
I buy a PicoScope 4424, but I do not have it's LabVIEW VI drive.
Could you give me it's VI to you ?
I will thank you very much!
yongsheng
 

Re: NEW LabVIEW Drivers and Examples for 4000, 5000 and 6000

Postby yongsheng » Mon May 16, 2011 1:40 am

Hello!
I bought a series of PICO 4000 data acquisition card, but I did not drive it in the LabVIEW VI, can be your 4000 series driver send me a LabVIEW VI? I would appreciate it!

yongsheng
yongsheng
 

Re: NEW LabVIEW Drivers and Examples for 4000, 5000 and 6000

Postby ziko » Tue May 17, 2011 1:14 pm

Hi you can find out labview drivers on our software download page, please follow the link below:

http://www.picotech.com/software.html

Choose your product from the list and then select SDK.

Kind regards
Ziko

Technical Specialist
ziko
Zen Master
Zen Master
 
Posts: 1705
Joined: Fri Dec 01, 2006 10:03 am
Location: St Neots

Re: NEW LabVIEW Drivers and Examples for 4000, 5000 and 6000

Postby dorrino » Mon May 30, 2011 9:42 am

Hello !

I'm using Labview 7.1 and the VI in the Software Development Kit is in a later version.
Can you provide me with the VI for 7.1 version ?

Thanks
dorrino
 

Re: NEW LabVIEW Drivers and Examples for 4000, 5000 and 6000

Postby Chris » Tue Jun 07, 2011 7:38 am

We are not able to save the examples in a format copatible with v7.1.

You can download a free 30 day trial of the latest labview version

http://www.ni.com/trylabview/

and use it to see how the example code works, then port this back to your 7.1 version.
Chris
Site Admin
Site Admin
 
Posts: 169
Joined: Tue Aug 17, 2010 9:00 am
Location: St. Neots

Re: NEW LabVIEW Drivers and Examples for 4000, 5000 and 6000

Postby jon@ktizo.co.uk » Fri Oct 28, 2011 9:18 am

Great - nice to have soem decent drivers for LabVIEW at last!
The only problem is, I'm using the 220x series. Any news on releasing a version for that too?
Jon.
jon@ktizo.co.uk
Newbie
 
Posts: 0
Joined: Fri Oct 28, 2011 9:09 am

Re: NEW LabVIEW Drivers and Examples for 4000, 5000 and 6000

Postby Martyn » Fri Oct 28, 2011 9:37 am

There are currently no plans to update the LabView examples for the existing 2000 series scopes (2203,2204,2205). However there will be updated examples to support the new additions to the 2000 range (2206,2207,2208)

http://www.picotech.com/news.html?source=HP3yaz
Martyn
Technical Specialist
Martyn
Site Admin
Site Admin
 
Posts: 2350
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Next

Return to LabVIEW

Who is online

Users browsing this forum: No registered users and 0 guests