Test and Measurement Forum

ADC 10

Post general discussions on using our drivers to write your own software here

ADC 10

Postby jakup » Sun Sep 05, 2010 9:59 am

Can I download any ociloscope software free for ADC 10.
Wath frequency range can I measure with it.
I have 2.4 Ghz computer Win XP/win 7
jakup
Newbie
 
Posts: 0
Joined: Sat Sep 04, 2010 11:32 pm

Re: ADC 10

Postby ziko » Mon Sep 06, 2010 11:31 am

Hi,

The ADC10 should work under Windows XP and Windows 7 32bit. The only limitation I may foresee is the parallel connection, some may work and some may not, a USB to parallel card will not work but a PCIE card or laptop card may work, give delock a go. If you have a parallel connection from your motherboard then that should work.

You can download the latest software from our web page:

www.picotech.com/software.html

Choose the ADC10 from the list and download PicoScope and/or Picolog.



Kind regards
Ziko

Technical Specialist
ziko
Zen Master
Zen Master
 
Posts: 1705
Joined: Fri Dec 01, 2006 10:03 am
Location: St Neots

Re: ADC 10

Postby jakup » Mon Sep 06, 2010 8:50 pm

ziko wrote:Hi,

The ADC10 should work under Windows XP and Windows 7 32bit. The only limitation I may foresee is the parallel connection, some may work and some may not, a USB to parallel card will not work but a PCIE card or laptop card may work, give delock a go. If you have a parallel connection from your motherboard then that should work.

You can download the latest software from our web page:

http://www.picotech.com/software.html

Choose the ADC10 from the list and download PicoScope and/or Picolog.



Kind regards

Thank you for reply !!!
jakup
Newbie
 
Posts: 0
Joined: Sat Sep 04, 2010 11:32 pm

Re: ADC 10

Postby ziko » Tue Sep 07, 2010 8:11 am

Your welcome, I forgot to add that the device samples at 20kS/s.
Ziko

Technical Specialist
ziko
Zen Master
Zen Master
 
Posts: 1705
Joined: Fri Dec 01, 2006 10:03 am
Location: St Neots

Re: ADC 10

Postby ziko » Tue Sep 07, 2010 8:11 am

Your welcome, I forgot to add that the device samples at 20kS/s.
Ziko

Technical Specialist
ziko
Zen Master
Zen Master
 
Posts: 1705
Joined: Fri Dec 01, 2006 10:03 am
Location: St Neots

Re: ADC 10

Postby jakup » Fri Sep 10, 2010 8:12 am

Can anybody tel me the type of IC within the ADC 10.

Would it be possible to replace it with a type thath has an
faster sampeling rate (Ms/Ps, + - readout capebilleties !!!).
jakup
Newbie
 
Posts: 0
Joined: Sat Sep 04, 2010 11:32 pm

Re: ADC 10

Postby ziko » Fri Sep 10, 2010 4:21 pm

Hi the device is one of the first units that we made 14 years ago:

http://www.picotech.com/pico-timeline.html#year91

You would not be able to simply change the chip to give you faster sample rates really, to start with it would not be compatible wit our software. I would suggest to have a look at an entry level unit like the PicoScope 2203, which can do 40MS/s :

http://www.picotech.com/picoscope2200-s ... tions.html

Kind regards
Ziko

Technical Specialist
ziko
Zen Master
Zen Master
 
Posts: 1705
Joined: Fri Dec 01, 2006 10:03 am
Location: St Neots


Return to General Software Discussions

Who is online

Users browsing this forum: No registered users and 0 guests