Test and Measurement Forum

ADC-100 + Vista + Hama Serial/USB Cable

Post any questions you may have about our current range of oscilloscopes

ADC-100 + Vista + Hama Serial/USB Cable

Postby WolomoloW » Mon Aug 23, 2010 6:07 pm

Hello,
I don't understand why the ADC-100 is not found.
Is there someone who can help me.
I don't know what kind of informations are necessary.

I install the USB/Serial cable with the driver.
I checked that everything is OK.
I install the PicoScope version I used before on Xp
I connect the ADC-100 with a DB9 connector, DB9 cable and finaly the Serial/USB to my PC
The software doesn't find the ADC-100

What's wrong ?

Thank You already for the help.
WolomoloW
Newbie
 
Posts: 0
Joined: Mon Aug 23, 2010 6:01 pm

Re: ADC-100 + Vista + Hama Serial/USB Cable

Postby ziko » Tue Aug 24, 2010 8:27 am

Hi,

The ADC100 uses a parallel interface a 25 pin parallel connector. It will not work with a parallel to USB connector. We used to manufacture a PicoParallel port that converted the connection to USB, however this has become obsolete. You will have to source a PC that has parallel port that is on a motherboard.

Kind regards
Ziko

Technical Specialist
ziko
Zen Master
Zen Master
 
Posts: 1705
Joined: Fri Dec 01, 2006 10:03 am
Location: St Neots

Re: ADC-100 + Vista + Hama Serial/USB Cable

Postby WolomoloW » Wed Aug 25, 2010 6:48 pm

Thank You for the reply.
WolomoloW
Newbie
 
Posts: 0
Joined: Mon Aug 23, 2010 6:01 pm


Return to USB PC Oscilloscopes

Who is online

Users browsing this forum: No registered users and 0 guests