Add a manual Trigger immediate button

Forum for discussing PicoScope version 6 (non-automotive version)
Post Reply
ffortino
User
User
Posts: 8
Joined: Wed Jan 16, 2008 4:17 pm

Add a manual Trigger immediate button

Post by ffortino »

I use the 4424 and 6403 scopes a lot, and some times after a trigger event, I would like to see the current state of the channels; so a button that would trigger immediately, and save the waveform without deleting all the other waveforms would really help.

Also there are times that after I set up my triggering, I would like to manualy trigger immediately a few times.

Also, it would help a lot; to have an option to zero out the channel inputs with shorted inputs.

Thanks

ziko
Advanced User
Advanced User
Posts: 1705
Joined: Fri Dec 01, 2006 10:03 am
Location: St Neots

Re: Add a manual Trigger immediate button

Post by ziko »

Hi and thank you for your suggestions. I have forwarded them to the relevant department.

BY the way have you tried to use alarm to capture waveforms when triggering?

Kind regards
Ziko

Technical Specialist

Post Reply