Test and Measurement Forum

pt104

Forum for discussing PicoLog

pt104

Postby andy » Thu Jan 15, 2004 6:11 am

Hello sir
1)We are interest using PT-104 for monitor some distance (15m) from temperature probe
Please advise method and gadget that help on This implementation.

2)As our understanding Pico log software can support multiple converter up to 9 for serial type converter and 4 for parallel type. Do this software Multi type (mix) converter for example PT -104 and RH -02.. TH -03 in one picolog .
thank

andy
andy
 

Postby markspencer » Thu Jan 15, 2004 8:45 am

Hi,

Thank you for your post.

The maximum recommended distance is 10 metres, this is due to the possiblility of increased noise therefore giveing rise to incorrect reading.

Picolog can use multiple unit 4 on the Parallel side and 20 on the serial side. A mixture of all produces can be used both on the Parallel port and on the Serial port.

Best regards,
Regards,

Mark Spencer
User avatar
markspencer
Site Admin
Site Admin
 
Posts: 598
Joined: Wed May 07, 2003 9:45 am


Return to PicoLog

Who is online

Users browsing this forum: No registered users and 1 guest