PicoScope 7 Software
Available on Windows, Mac and Linux
frequency reference table
frequency reference table
How do I fix the data in the spectra view?
I have for example a microphone with a sensitivity table as follows.
1V/μPa at 1 kHz
2V/μPa at 5 kHz
0.5V/μPa at 10 kHz
And so on.
How do I add such a reference file in PicoScope 6?
I have for example a microphone with a sensitivity table as follows.
1V/μPa at 1 kHz
2V/μPa at 5 kHz
0.5V/μPa at 10 kHz
And so on.
How do I add such a reference file in PicoScope 6?
Re: frequency reference table
If I understand correctly you would want to do the following:
1) Detect the frequency of a signal
2) Apply a different scaling setup for the different frequencies.
If that's the case then unfortunately this is not a feature that exists in the software.
Let me know if I have misunderstood your query.
Kind regards
1) Detect the frequency of a signal
2) Apply a different scaling setup for the different frequencies.
If that's the case then unfortunately this is not a feature that exists in the software.
Let me know if I have misunderstood your query.
Kind regards
Ziko
Technical Specialist
Technical Specialist
Re: frequency reference table
Thanks for the reply.
It is ptrecis what I want to do, to compensate for microphone frequency response so that the FFT spectra show the correct sound level.
What a shame you can not put this frequency compensation.
The program is otherwise really nice but I need this function.
Yours sincerely
Tages
It is ptrecis what I want to do, to compensate for microphone frequency response so that the FFT spectra show the correct sound level.
What a shame you can not put this frequency compensation.
The program is otherwise really nice but I need this function.
Yours sincerely
Tages
Re: frequency reference table
All I can do is put it forward as a suggestion. Thank you for your input.
Kind regards
Kind regards
Ziko
Technical Specialist
Technical Specialist