Test and Measurement Forum

WPS500

Post any questions you may have about our current range of oscilloscopes

WPS500

Postby s4c » Fri Jul 16, 2010 3:34 am

Hi


This week I bought the WPS500 and am just getting to grips with it.

Can you tell me how to change the measurements from mB to inHG as its a measurement I am more used to. I tried to make a custom probe but got confused when I got to the 'Y' 'X' options.

Regards

Simon
s4c
Newbie
 
Posts: 0
Joined: Thu May 01, 2008 8:50 am

Re: WPS500

Postby Lee » Mon Jul 19, 2010 9:19 am

Hi Simon

I have built some probes for the WPS500 which read in InHg in all 3 Ranges of the Pressure Transducer.

Please note there are 6 Probes which cover all 3 modes. 3 are called 'InHg Pressure' and 3 are called 'InHg VAC'.

The 'InHg Pressure' Probes are set to show Pressure in the Positive Range of the Software and Vacuum in the Negative Range of the Software.

The 'InHg VAC' Probes are set to show the Vacuum in the Positive Range of the Software and Pressure in the Negative Range of the Software.

I have built them like this as I know engineers and Technicians have different preferences of wanting to see Vacuum as a Read Out.

I hope this helps.

Kind Regards

Lee - Automotive Technical Specialist :D
Attachments
WPS500 (InHg) Probes All Ranges.zip
(3.77 KiB) Downloaded 207 times
Lee
Active User
Active User
 
Posts: 5
Joined: Fri Feb 19, 2010 10:36 am
Location: Suffolk, UK

Re: WPS500

Postby s4c » Mon Jul 19, 2010 6:40 pm

Hi Lee

Many thanks for that. I will have a play with them today at work and let you know how I get on.

Regards

Simon
s4c
Newbie
 
Posts: 0
Joined: Thu May 01, 2008 8:50 am


Return to USB PC Oscilloscopes

Who is online

Users browsing this forum: No registered users and 0 guests