Delay between waveforms-PicoScope 2105

Post any questions you may have about our current range of oscilloscopes
Post Reply
Antony
Newbie
Posts: 0
Joined: Mon Jun 28, 2010 5:56 pm

Delay between waveforms-PicoScope 2105

Post by Antony »

I'm using the PicoScope 2105. I noticed that when capture a sequence of waveforms, there are some delays between each waveform. How much is the delay and how to minimize it?

Since the signal i try to capture is long, I need several waveforms to cover it. And i can't increase time/div value for capture, since it will lose too much detail of the signal.

Thanks.
Top
ziko
Advanced User
Advanced User
Posts: 1705
Joined: Fri Dec 01, 2006 10:03 am
Location: St Neots

Re: Delay between waveforms-PicoScope 2105

Post by ziko »

Hi this delay is the trigger re-arm time, and will be in milliseconds, the time will vary between computer to computer.

Hope this helps.

Kind regards
Ziko

Technical Specialist
Top
Post Reply

Return to “USB PC Oscilloscopes”