Delay between waveforms-PicoScope 2105

Post any questions you may have about our current range of oscilloscopes
Post Reply
Antony
Newbie
Posts: 0
Joined: Mon Jun 28, 2010 5:56 pm

Delay between waveforms-PicoScope 2105

Post by Antony » Mon Jun 28, 2010 6:36 pm

I'm using the PicoScope 2105. I noticed that when capture a sequence of waveforms, there are some delays between each waveform. How much is the delay and how to minimize it?

Since the signal i try to capture is long, I need several waveforms to cover it. And i can't increase time/div value for capture, since it will lose too much detail of the signal.

Thanks.

ziko
Advanced User
Advanced User
Posts: 1705
Joined: Fri Dec 01, 2006 10:03 am
Location: St Neots

Re: Delay between waveforms-PicoScope 2105

Post by ziko » Tue Jul 13, 2010 3:33 pm

Hi this delay is the trigger re-arm time, and will be in milliseconds, the time will vary between computer to computer.

Hope this helps.

Kind regards
Ziko

Technical Specialist

Post Reply