Test and Measurement Forum

Environment by using IP

Environment by using IP

Postby John_Alfred » Sun Jun 20, 2010 6:52 am

Dear all,

We installed Environment application R5.21.5-32 bits on a PC which has a direct connection through COM1 to a logger and we can monitor all readings. This PC has an IP address such as

We can see the aforementioned PC IP address on the PCs connected to the network. So, we installed client Environment R5.21.5-32 bits on another PC connected to the same network. We configured this PC through Settings-Configuration-Change-Advance and selected Equipment then the following:- "Connection: IP Network", "IP Server: RJR-Console.corp.com.ua" and "IP Port: 1051".

Once we run Environment client on remote PC, we get error message "WARNING: Logger not found Server RJR-Console.corp.com.ua port 1051"

Please assist and advice

Re: Environment by using IP

Postby ziko » Tue Jul 13, 2010 1:02 pm

Have you tried typing in the ip address instead? Also have you made sure that the firewall allows your software on both ends to work?

Technical Specialist
Advanced User
Advanced User
Posts: 1705
Joined: Fri Dec 01, 2006 10:03 am
Location: St Neots

Return to Hardware

Who is online

Users browsing this forum: No registered users and 0 guests