Test and Measurement Forum

Reading ADC11/22 .psd files

Post any questions you may have about our current range of USB data loggers

Reading ADC11/22 .psd files

Postby Chris Ferris » Fri Jun 18, 2010 3:35 pm

I have been sent some .psd files from a project that was active in 2001. I do not have any Picoscope hardware of software but would like to extract the data somehow, weither into a .csv file or into an excel spreadsheet.

Does anyone know if this can be done without software, or if the demo software suite can so this?

Many thanks

chris.ferris 'at' team-consulting.com
Chris Ferris
 

Re: Reading ADC11/22 .psd files

Postby Lee » Tue Jun 29, 2010 1:14 pm

Hi Chris

Thanks for your post.

In regards to the software you can download the software directly from our website:-

http://www.picotech.com/software.html

You will then need to select the options as shown below. Once you open the PicoScope Software you can then open the files individually and save the files as (*.TXT) files which you can then open in Excel and then Save as an Excel File.

I hope this helps to answer your question and if you have any further questions and queries then please dont hesitate to get back in touch :D

Regards

Lee - Technical Specialist.
Attachments
ADC 11-12 Software Page.png
Lee
Active User
Active User
 
Posts: 5
Joined: Fri Feb 19, 2010 10:36 am
Location: Suffolk, UK


Return to USB PC Data Loggers

Who is online

Users browsing this forum: No registered users and 0 guests