ADC-216 in Windows 7

Post any questions about our parallel port products
Post Reply
JAMES YUNG

ADC-216 in Windows 7

Post by JAMES YUNG » Tue Jun 01, 2010 2:43 pm

Hi,

I bought a new computer with Windows 7 as the operating system.

Will my ADC-216 with Parallel port to USB convertor works? Which software should I download? :(

Pico Stuart
Site Admin
Site Admin
Posts: 75
Joined: Tue Jun 30, 2009 3:08 pm

Re: ADC-216 in Windows 7

Post by Pico Stuart » Wed Jun 09, 2010 12:27 pm

Hi James,

Thankyou for your inquiry with regard to your ADC 216 application.

Please proceed to the following link and download PicoScope R5.21.1 from the following link. The installation program will install both PicoScope and PicoLog (if you just want one of these programs, select custom installation when prompted).

http://www.picotech.com/software.html

Please note: parallel port products and the USB ADC-11 do not support 64-bit operation.

If you encounter any difficulties please do not hesitate to contact me.

Kindest regards,

Stuart
Technical Specialist

Post Reply