Test and Measurement Forum

PicoScope 3000 Series on ARM Linux

Post any questions you may have about our current range of oscilloscopes

PicoScope 3000 Series on ARM Linux

Postby chackal_sjc » Mon May 24, 2010 2:46 pm

Hello guys,

I'm new here, my name is Felipe Tonello, I'm from the High Voltage Laboratory - Federal University of Itajubá - Brazil.

We are using a PicoScope 3205/3206 and we want to build an embedded system to communicate with PicoScope. Is is possible to work on ARM Linux? I'm saying that because I can't see a Linux support.

If it's not possible, is there any suggestions?

Thank you
chackal_sjc
 

Re: PicoScope 3000 Series on ARM Linux

Postby easotor » Mon Feb 24, 2014 2:22 pm

Hi Felipe,

I have the same problem of communication of the picoscope with a computer with ARM arquitecture. Have you find any solution?

Thank for your help.

Edison Soto
Federal University of Mina Gerais.
easotor
Newbie
 
Posts: 0
Joined: Mon Feb 24, 2014 2:14 pm

Re: PicoScope 3000 Series on ARM Linux

Postby Martyn » Mon Feb 24, 2014 3:04 pm

For full details of our Linux support please check the following page on our website

http://www.picotech.com/linux.html

unfortunately this does not include the ARM architecture at the present time.
Martyn
Technical Specialist
Martyn
Site Admin
Site Admin
 
Posts: 2287
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots


Return to USB PC Oscilloscopes

Who is online

Users browsing this forum: No registered users and 0 guests