calibration of ADC-216

Which product is right for your exact requirements
Post Reply
lynn.kern

calibration of ADC-216

Post by lynn.kern »

Our organization is contemplating using the ADC-216 to perform some temporal measurements. There is a requirement for regular calibraiton. The limits of the cal are defined as +/- 0.1 of the finest time measurement, which is 3 ms. My question is, do I have to remove and send the unit back to you folks for cal? If so, do you have a product that allows for calibration in the field?
thanks!!

User avatar
markspencer
Site Admin
Site Admin
Posts: 598
Joined: Wed May 07, 2003 9:45 am

Post by markspencer »

Hi,

The ADC-216 does have to come back to us for calibration and the calibration is valid for one year from date of issue. We do not have any unit that can be calibrated in the field.

Best regards,
Regards,

Mark Spencer

Post Reply