Test and Measurement Forum

calibration of ADC-216

Which product is right for your exact requirements

calibration of ADC-216

Postby lynn.kern » Fri Dec 05, 2003 5:57 pm

Our organization is contemplating using the ADC-216 to perform some temporal measurements. There is a requirement for regular calibraiton. The limits of the cal are defined as +/- 0.1 of the finest time measurement, which is 3 ms. My question is, do I have to remove and send the unit back to you folks for cal? If so, do you have a product that allows for calibration in the field?
thanks!!
lynn.kern
 

Postby markspencer » Mon Dec 08, 2003 9:07 am

Hi,

The ADC-216 does have to come back to us for calibration and the calibration is valid for one year from date of issue. We do not have any unit that can be calibrated in the field.

Best regards,
Regards,

Mark Spencer
User avatar
markspencer
Site Admin
Site Admin
 
Posts: 598
Joined: Wed May 07, 2003 9:45 am


Return to Pre-Sales Advice

Who is online

Users browsing this forum: No registered users and 1 guest