Test and Measurement Forum

Pico scope 5203

Post any questions you may have about our current range of oscilloscopes

Pico scope 5203

Postby Vicky » Thu May 20, 2010 11:54 am

Hello everybody,

I would like to save the measured data from Picoscope 5203 on the PC. Can i use software like picolog or EnviroMon?
The data should be saved for a few minutes with high resolution.
Is there any other sotware i can use?

Greetings,
Vicky
Vicky
 

Re: Pico scope 5203

Postby PeterF » Wed Jun 16, 2010 2:10 pm

Hi Vicky,
You will be pleased to hear that all the data that you collect and see in PicoScope6 can very easily be saved to the hard disk by selecting "File", "Save All Waveforms As" & typing in a file-name. You can same just the current visible waveform by selecting "Save Current Waveform As".
You do not need and cannot use the PicoLog or Enviromon programs.
Here is a link to the PicoScope6 manual which explains most of the features:-
http://www.picotech.com/document/pdf/psw6.en-14.pdf
Regards,
PeterF.
PeterF
Zen Master
Zen Master
 
Posts: 435
Joined: Thu Jun 07, 2007 10:53 am
Location: Cambridgeshire


Return to USB PC Oscilloscopes

Who is online

Users browsing this forum: No registered users and 0 guests