Interfacing Picolog and a GPS receiver

Post any questions about our parallel port products
Post Reply
jpowell

Interfacing Picolog and a GPS receiver

Post by jpowell » Mon Dec 01, 2003 3:28 pm

I have an ADC-212 unit using Picolog R5.06.3 and I would like have it show GPS data as it runs. I have found equipment such as the Garmin GPS16-HVS receiver that seems like it would work, but I don't know how to make Picolog read it. Does Pico have some type of patch or add on software to do this?

User avatar
markspencer
Site Admin
Site Admin
Posts: 598
Joined: Wed May 07, 2003 9:45 am

Post by markspencer » Tue Dec 02, 2003 8:22 am

Hi,

Unfortunately, Picoscope and Picolog do not have a patch or add on that would allow you to us it with this unit. Even if you are able to get both to work together the way that the ADC-212 is designed to collect data is in blocks and then download the information to the PC. In this way there is not continuous data being sampled.

Best regards,
Regards,

Mark Spencer

Post Reply