Test and Measurement Forum

ADC-216 + Excel '07 + Windows XP + PicoScope 5.21.1

Forum for discussing PicoScope (version 5)

ADC-216 + Excel '07 + Windows XP + PicoScope 5.21.1

Postby noelv » Wed May 05, 2010 8:52 am

Would you have an example of how to import BOTH channels of the 216 into an Excel '07 spreadsheet. (Or into an OpenOffice 3.2 spreadsheet).
I can import channel A OR B (by switching one or the other off) but never both A and B together.
Thank you.
noelv
Newbie
 
Posts: 0
Joined: Wed May 05, 2010 7:58 am

Re: ADC-216 + Excel '07 + Windows XP + PicoScope 5.21.1

Postby PeterF » Wed May 12, 2010 8:32 am

Hi Noel,
Are you sure you are not getting both channels in your .txt file? The second channel is always BELOW the first channel, in the same columns. Scroll down to halfway through the Excel spreadsheet and the second channel will start at that point.
Regards,
PeterF.
PeterF
Zen Master
Zen Master
 
Posts: 435
Joined: Thu Jun 07, 2007 10:53 am
Location: Cambridgeshire


Return to PicoScope 5

Who is online

Users browsing this forum: No registered users and 0 guests