Which scope to get?

Which product is right for your exact requirements
Post Reply
Guest

Which scope to get?

Post by Guest » Wed May 05, 2010 8:27 am

Hi!

I'm more or less new to scopes and am trying to capture/analyze (digital) ISDN (BRI/PRI) signals. Those signals have a data-rate of 192kbit/sec (BRI) or 2048kbit/sec (PRI).
I want to be able to capture those signals (as waveforms) for at least 5 (better 10) seconds.
In a second stage, I might try to capture a different (digital) signal operating at 8MHz - but that would only be a nice addon.

Pico Stuart
Site Admin
Site Admin
Posts: 75
Joined: Tue Jun 30, 2009 3:08 pm

Re: Which scope to get?

Post by Pico Stuart » Wed May 12, 2010 2:24 pm

Hi There,

Thankyou for your inquiry with regard to capture/analyze (digital) ISDN (BRI/PRI) signals.

In theory you could could use two channels at use the maths functionality to obtain the differential measurements.

In order to assist you further please could you proceed to the following application note which will assist you in choosing the correct scope for your application.

http://www.picotech.com/applications/os ... orial.html

In addition to this please do not hesitate to contact me at suppport@picotech.com if you require further assistance.

Kindest regards,

Stuart
Technical Specialist

Post Reply