Test and Measurement Forum

connect 2 computer have Labview software on the network

Post your LabVIEW discussions here

connect 2 computer have Labview software on the network

Postby vienthong » Wed Apr 21, 2010 2:12 pm

Hi,i have a computer use picoscope 2104 to measure with the VI ps2000.vi, but i want to control or save data on another computer (have Labview software) on the network. Can u help me! thank so much!
vienthong
Newbie
 
Posts: 0
Joined: Sat Mar 13, 2010 2:20 pm

Re: connect 2 computer have Labview software on the network

Postby Robin » Thu Apr 22, 2010 11:40 am

Hi

I believe this is possible if you have Labview on both machines.

This is really a question about Labview, so you would be better off consulting the documentation or NI.

Robin
Robin
Zen Master
Zen Master
 
Posts: 558
Joined: Fri Sep 19, 2008 10:17 am

Re: connect 2 computer have Labview software on the network

Postby vienthong » Thu Apr 22, 2010 1:44 pm

thank u! so can u help me? do u have any document about this topic! thank u so much!
vienthong
Newbie
 
Posts: 0
Joined: Sat Mar 13, 2010 2:20 pm

Re: connect 2 computer have Labview software on the network

Postby christianbaker » Tue Apr 27, 2010 9:34 am

I think this is what you need

http://zone.ni.com/devzone/cda/tut/p/id/2710

but, as Robin said, you'll be much better off posting further queries about it in the national instruments labview forums here

http://forums.ni.com/ni/board?board.id=170

since your problem really has nothing to do with your picoscope
christianbaker
Newbie
 
Posts: 0
Joined: Mon Apr 19, 2010 12:27 pm
Location: London, UK


Return to LabVIEW

Who is online

Users browsing this forum: No registered users and 1 guest