Test and Measurement Forum

Question about the USB PC O'scopes

Post any questions you may have about our current range of oscilloscopes

Question about the USB PC O'scopes

Postby MDOC » Wed Apr 14, 2010 2:50 am

Is it truly hardware based? That is, are all the DAQ and sub processors in the box, or does it require the PC to do signal processing and analysis?
MDOC
 

Re: Question about the USB PC O'scopes

Postby PeterF » Wed Apr 14, 2010 3:29 pm

Hi,
All the multiplexing, sampling and digitising, as well as gain changes etc are done in the scope itself largely by programmable logic. The raw data is then sent to the PC via USB where all the post-processing for the PicoScope GUI is done. This system ensures that your PicoScope is always upgradeable by downloading the latest software from our website.
Regards,
PeterF.
PeterF
Zen Master
Zen Master
 
Posts: 435
Joined: Thu Jun 07, 2007 10:53 am
Location: Cambridgeshire

Re: Question about the USB PC O'scopes

Postby Guest » Wed Apr 14, 2010 5:06 pm

Thanks.
Guest
 


Return to USB PC Oscilloscopes

Who is online

Users browsing this forum: No registered users and 0 guests