two measurement lines on one graph (capture and overlay)?

Forum for discussing PicoScope version 6 (non-automotive version)
Post Reply
rockline1

two measurement lines on one graph (capture and overlay)?

Post by rockline1 » Fri Apr 09, 2010 9:37 am

if i want to compare two measurement line on one display, how could i do this?
for example: i made a two channel measurement. Channel A ist a 15mS DC Signal, and channel two is a DC signal from a laserdistance sensor from the move of an actuator. In a second measurement with the same channel A signal (an graph) i will get another laserdistance signal (eg another pressure on an actuator) and want to compare this with the measurement from the first time.
The only way i know is to store the two measurements, and compare it. But is there a way to get both measurement on one window, like i do a capture from the first measurement and add it in the second measurement, so that i can compare it direkt like an overlay?
This would be great!
Thank you - Stefan

PeterF
Advanced User
Advanced User
Posts: 435
Joined: Thu Jun 07, 2007 10:53 am
Location: Cambridgeshire

Re: two measurement lines on one graph (capture and overlay)?

Post by PeterF » Fri Apr 09, 2010 9:47 am

Hi,
You can do this easily in PicoScope6. Just go to "Tools", "Reference Waveforms" and follow the instructions in the "Help" dialogue. You can save multiple waveforms like this.
Regards,
PeterF.

Guest

Re: two measurement lines on one graph (capture and overlay)?

Post by Guest » Fri Apr 09, 2010 7:18 pm

GREAT Software & support!!
I would say that is the best i've ever seen the last years :D
Thx - Stefan

Post Reply