Test and Measurement Forum

Serial Synchronised Auto Measurement

Which product is right for your exact requirements

Serial Synchronised Auto Measurement

Postby Guest » Fri Apr 02, 2010 11:07 am

Hi,

I have a requirement to perform automated, repeated tests for a stereo pair of audio signal channels in a production pass/fail test. Ideally this would include a distortion measurement. The DUT can be controlled through a serial bus. I would like to know if its possible to use a Picoscope hardware/software solution to automatically run multiple parameter tests synched with the DUT via a PC. I have access to a software programmer who can write the routine. Can you advise if this is possible?

Many thanks, Simon
Guest
 

Re: Serial Synchronised Auto Measurement

Postby PeterF » Thu Apr 08, 2010 2:46 pm

Hi,
Our scopes can either be controlled:-
Manually using the PicoScope6 GUI, with all the facilities provided for you
or:-
Using your own application, written with the aid of our "Software Development Kit" where you will need to do all your own signal processing to obtain measurements.

PicoScope6 cannot be controlled by an external program.

Regards,
PeterF.
PeterF
Zen Master
Zen Master
 
Posts: 435
Joined: Thu Jun 07, 2007 10:53 am
Location: Cambridgeshire


Return to Pre-Sales Advice

Who is online

Users browsing this forum: No registered users and 0 guests